Dual Column UTM’s can be either electromechanical or servo-hydraulic

Generally, hydraulic machines are better suited for extremely repetitive testing of high strength materials in production environments. The electro-mechanical machines are much more versatile in terms of their speed, and length of stroke, which better suits them for R&D environments where many different types of tests can be performed.

Increasing cases of COVID-19 across the globe is resulting in economic slowdown. The impact of COVID-19 is being absorbed in each sector of the economy, including the global manufacturing industry. This, in turn, is projected to indirectly hinder the global tensile testing machine market in the next few years. IDM Instruments’ UTM comes with fixed dual testing capabilities. As it eliminates the need of having two machines required for testing.

The high stiffness frame incorporates a crosshead guidance system to prevent side loading of the sample under test. The crosshead is driven by twin lead screws and a high precision servo motor and DC servo system to achieve a wide range of speeds throughout the full load range. Suitable for checking all types of polymers, compounds, composite materials, fibre reinforced plastics and polymeric materials. The VantageNX Tensile Testing Machine is a revamped design of the EJA Vantage Series of Tensile Testers. With a small footprint and ergonomic design testing can be completed efficiently with this instrument. It is the part of the machine that is fixed with one end of the testing specimen and one end of the load cell.

torque china

Strain measurements can be done directly from the extensometer fitted to the specimen. Advanced software and frame design for just about any test in a wide range of materials. This is the 100th anniversary of manufacturing Shimadzu testing machines. If you would like to speak with our highly qualified in-house engineering team about our dynamic testing machine range, give us a call. Tensile testers are used to test the strength of a sample part or component and allow manufacturers to see exactly what level of stress will cause it to fail. AE events were monitored over 0–512kHz of the frequency specimen.

The recording speed of the high-speed camera was 1000 frames per second under full resolution. Rubber compounds for use in tires – the elongation and tensile strength of tire rubber is tested for quality control purposes to avoid tire failures such as tread separation and blowouts. Our testing software is an extremely user-friendly, wizard-guided, and Windows-based solution that allows users to set up the testing system, configure and run tests and view results. ThyssenKrupp Presta – Production-related quality control on camshafts with TorsionLine torsion testing machine. Medical industry – For tensile tests on different materials used in implantable neuroelectrodes, CorTec uses a testing system from ZwickRoell.

The stepper motor driver used in this machine is an A4988 on a StepStick format board. StepSticks are usually used with 3D printers and CNC routers, and therefore they are often easily replaceable. Create a sketch on that plane and follow the second picture to create the 4.8mm mounting holes. Extrude the covered part of the rectangle out using the cut operation to create the cutout. Create a 1mm offset plane from the bottom of the mounting hole and create a sketch on that offset plane. It is connected with the lead screw nut and one end of the load cell.

I will be carrying on the tradition of explaining every step of the design; this includes every bit of detail from the design process all the way to the assembly of the machine (excluding few hard-to-explain parts). This makes it so that the user understands every step made to achieve the end result. Thanks to knowledgeable and experienced technical personnel and spare parts stocks, Laboratory Test Equipment aims to provide fast and high quality solutions to service and maintenance needs. Our company, which constantly develops on its way to become a long-term business partner for industrial organizations, has been able to meet all Laboratory needs of such organizations. Thanks to its expertise in special projects, it is able to offer solutions tailored to Laboratory needs and performs after-sales services throughout the physical life of the products.